Using Your; Response - BT RESPONSE 5 User Manual

Using your Response 5
Answering machine
controls
TO RECORD
SAVE MEMO
AN OUTGOING
MESSAGE
FF
STOP
PRESS THE
OGM BUTTON.
SPEAK AFTER
+
––
OGM THE TONE
PRESS STOP
TO END
RECORDING.
The buttons used to set your
Response 5 are located beneath its
cover. You will need to lift the
cover to access these buttons.
To ensure clear playback of messages
and memos, always make sure that the
volume is set to an audible level.
Setting the playback volume
You can adjust the playback volume
as follows.
+
––
Lift the cover.
•
Press + button to increase the
•
volume and – button to decrease
the volume. You hear beeps which
get louder as the volume is
increased or quieter when the
volume is decreased.
7
When set to the lowest level the
You can adjust the volume during
beep is inaudible.
message playback.
When recording your outgoing
message, set the volume so that you
can hear the beep that tells you when
to begin speaking.
The volume of your outgoing message
is not affected by the volume setting for
playback.