Using Your Response - BT RESPONSE 70 User Manual

To set
the volume
The message playback
volume can be set to a
level suitable for you.
Press + to increase
the volume.
VOLUME
Press - to decrease
the volume.
As you press, a beep
sounds at the level
you are selecting.
When the volume is at
its highest or lowest
you will hear 2 beeps.
Beep!
8
Using your
Response 70
If you alter the volume
during playback of a
message, the beep does
not sound but the volume
will change accordingly.
If the volume is below
mid-volume it will
automatically return to
the mid-volume setting
when any buttons are
pressed (for example, if a
+
message is played back).
The volume is unaffected
during remote access or
call screening.
outgoing message
The outgoing message
is the message a caller
hears when your
Response 70 answers
a call.
The Response 70 has
a pre-recorded
outgoing message
To record your
which announces ...
Hello, your call cannot
be taken at the moment, so please
leave your message after the tone.
You can record your
own outgoing message
to replace the pre-
recorded message.
If you record your
own message, the pre-
recorded message is
automatically removed
and stored in memory,
in case you wish to
reinstate it.
Your Response 70 has a
total recording capacity
of 14 minutes. Any
outgoing message you
record can be up to 2
minutes long, but you
should keep it short to
allow more time for
recording incoming calls.
To record your
outgoing message