Call Barring On/Off; Set Call Barring Number; Reset - BT HUDSON 1100 User Manual

Call barring on / off
1. Press Menu, scroll
press SeleCt.
2. Scroll to
CAll
3. Enter the system PIN (default setting 0000) and press ok.
is displayed, press SeleCt.
4.
BArring MoDe
5. Scroll or to
6. Press to return to the previous menu.
BACk

Set call barring number

You can enter up to four numbers to be barred.
1. Press Menu, scroll
press SeleCt.
2. Scroll to
CAll
3. Enter the system PIN (default setting 0000) and press ok.
4. Scroll to
BArring nuMBer
5. Scroll or to the barring number you want and
press SeleCt.
6. Enter the number you want to bar. You can put up to 4 digits.
Press to confirm.
ok
7. Press to return to standby.

Reset

You can re-set a handset to its default settings.
1. Press Menu, scroll
press SeleCt.
2. Scroll to reSet, press SeleCt.
3. Enter the system PIN (default setting 0000) and press ok.
4. Display shows
ConfirM?
to cancel.
5. Press again. All settings are reset to their defaults, see the
ok
following page.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
or to
ADvAnCeD Set
BArring, press SeleCt.
or and press SeleCt.
on off
or to
ADvAnCeD Set
BArring, press SeleCt.
and press SeleCt.
or to
ADvAnCeD Set
Press to confirm or
ok
and
You cannot bar emergency service
numbers 999 or 112.
When Call barring is set to On, the
standby screen shows BArring
MoDe on.
and
and
This will delete all messages and clear
the calls list and redial list.
Phonebook entries will not be deleted
by a reset. To clear the phonebook
select the Delete All option from
the phonebook menu, see page 19.
BACk
32