Connect To The Telephone Line - BT FREELANCE XC 1100 User Manual

8 Getting started
Battery performance
To keep the batteries in the best
condition, leave the handset off the
base for a few hours at a time.
Running the batteries right down at
least once a week will help them last as
long as possible.
After charging your handset for the
first time, subsequent charging time
for the batteries is approximately
6–8 hours.
The charge capacity of rechargeable
batteries will reduce with time as they
wear out, thus reducing the
talk/standby time. Eventually they will
need replacing. For details on how to
obtain spare rechargeable batteries,
contact the BT Freelance XC1100
Helpline on 0870 242 6652*.
IMPORTANT
Only use the telephone line cord
supplied with the phone.
The display will show the handset number,
registered to the base.
iii. Place the handset on the charger. It will beep when placed in
and the battery icon on the handset will flash to indicate
charging. You should let the batteries charge continuously for
at least 24 hours.
Any additional handsets supplied as part of a multipack are
pre-registered to the base. So, once charged, are ready for use.

Connect to the telephone line

4. Plug the telephone line cord into the socket marked on the
back of the base and plug the other end into the telephone
wall socket.
Your BT Freelance XC1100 is now
ready for use.
If you experience any problems, please call the Helpline on 0870 242 6652*
, to show it is
2