Additional Handsets; Register A New Bt Freelance Xc1100 Handset To Your Bt Freelance Xc1100 Base - BT FREELANCE XC 1100 User Manual

Additional handsets

Up to 5 handsets can be registered and operated from the BT
Freelance XC1100 base.
If you buy new handsets to use with your BT Freelance
XC1100 they will have to be registered to the base before you
can use them.
Register a new BT Freelance XC1100 handset to your BT
Freelance XC1100 base
1. At the base: Press and hold
continuous beeping. You now have 60 seconds to register the
handset.
2. At the handset: press
and press .
3. Scroll to
REGISTRATION
4. Enter the 4-digit master PIN (default setting 0000) and
press . The display flashes
5. A list of available handset numbers is displayed, enter the
number you require using the keypad. You will hear a beep.
The handset is now registered.
If registration does not work:
• Make sure there is no other electrical equipment very close by
that may interfere with the registration signal.
• Try following steps 1-5 above again.
If you experience any problems, please call the Helpline on 0870 242 6652*
for 5 seconds until you hear
, scroll to
ADVANCED SET
and press .
.
WAITING
Handsets that were supplied with your
BT Freelance XC1100 base are already
registered to it as HANDSET 1,
HANDSET 2 etc.
Each additional handset you buy must
be registered with the base.
IMPORTANT
Before registration, make sure the
handset batteries are fully charged and
that you are close to the base.
Cancel registration
Press .
Naming additional handsets
Once you have registered additional
handsets you may wish to give them a
different name, see page 29.
33