Suunto Ambit 2.0 User Manual page 88

Tones/display
● Invert display: inverts the display
● Tones:
○ All on: button tones and system tones are activated
○ Buttons Off: only system tones are activated
○ All off: all tones are off
NOTE: The alarm will sound even when all tones are off.
● Backlight
Mode:
○ Normal: The backlight is switched on for a few seconds when you press
[Light Lock] and when the alarm sounds.
○ Off: The backlight is not switched on by pressing a button or when the
alarm sounds.
○ Night: The backlight is switched on for a few seconds when you press
any button and when the alarm sounds. Using the Night mode
significantly reduces battery duration.
○ Toggle: The backlight is switched on when you press [Light Lock]. It
stays on until you press [Light Lock] again.
Brightness: Adjust backlight brightness (in percentages).
● Display contrast: Adjust the display contrast (in percentages).
Compass
● Calibration: Start compass calibration.
● Declination: Set the compass declination value.
Map
● Orientation
88