Using Backlight And Button Lock - Suunto Ambit 2.0 User Manual

[View]:
● change views in
● keep pressed to invert the display from light to dark and vice versa
[Back Lap]:
● return to the previous step
● add a lap during exercise
TIP: When changing the values, you can increase the speed by keeping [Start
Stop] or [Light Lock] pressed until the values start to scroll faster.

4.1 Using backlight and button lock

You can set the backlight to Normal, Toggle or Night mode. For information
on the backlight settings, see Chapter 14 Adjusting settings on page 86.
To activate the backlight:
● In Normal mode, press [Light Lock] to activate the backlight. The backlight
stays on for a few seconds.
● In Toggle mode, press [Light Lock] to activate the backlight. The backlight
stays on until you press [Light Lock] again.
● In Night mode, press any button to activate the backlight.
Keep [Light Lock] pressed to lock or unlock the buttons. When the buttons are
locked, is shown on the display.
TIP: Lock the buttons to avoid accidentally starting or stopping your log. When
the buttons are locked, you can still activate the backlight by pressing [Light Lock],
change between the displays by pressing [Next] and views by pressing [View].
mode and during exercise
TIME
en
11