Open Flash; External Synchronisation; Photocell; Sounder - Bowens DUO 2400 PACK Operating Instructions Manual

Open Flash

Press the 'OPEN FLASH' button to test the flash operation of the Pack and head(s).
When decreasing the power setting of the Pack using the 'FLASH' Variator(s) or
'POWER' switch simply flash once using this button to adjust to your new setting.

External Synchronisation

A 6.35mm, low voltage, 'SYNC' jack socket is provided on the control panel for
external synchronisation. The socket accepts the supplied standard Sync. lead for
direct connection to the camera.

Photocell

The built in Photocell may be used for remote triggering from another flash source or a
Remote IR Trigger. Set the 'PHOTOCELL' switch to 'ON' to enable the Photocell. The
Red indicator LED below the switch will be lit when the Photocell is in operation.

Sounder

Set the 'SOUNDER' switch to 'ON' to enable the Sounder. The Red indicator LED
below the switch will be lit when the Sounder is in operation. When the Sounder is
switched 'ON' it will give a short beep when the Pack comes to 'READY'.
- 10 -