Pinout - Eneo VKC-1319 Installation And Operating Instructions Manual

5. Pinout

Power Supply
12VDC
Note
3
1
Lens connection
Signal level
Remark
3
1
Lens connection
Signal level
24VAC
G
Only switch on the power supply when all the other connections have been
carried out. The use of power supply units with stabilised output voltage
(12VDC ±10%) is recommended.len.
4
2
E/I switch in off position
A/I switch in dc position
To be optimized with LEVEL potentiometer
Use only DC voltage controlled lenses with internationally standardized plug pinout.
4
2
E/I switch in off position
A/I switch in video position
Optimise via the „LEVEL" regulator on the AI lens.
G
DC voltage controlled lenses
Description
1 Damp (-)
2 Damp (+)
3 Drive (+)
4 Drive (-)
Videosignal controlled lenses
Description
1 Supply voltage
2 N.C.
3 Video
4 Ground
22
Colour
red
–
white
black