Combining Designs; Corded Trim; Single Cord For Gathering Heavy Fabric - ELNA 6200 Instruction Manual

F
H
H
42

Combining Designs

Add a decorative accent to your sewing. Express your
creative talents by alternating designs.
Remember to use stabilizer appropriate to the fabric.
Sew two hearts; press the "Auto-Lock" key while sewing
the second heart.
Select and sew flower; press the "Auto-Lock" key while
sewing flower.
Repeat as many times as needed.

Corded Trim

Sew over three strands of cording to create unique
borders and trims. Pearl cotton, knitting yarn, embroidery
floss, lace thread, fine wool or lily yarn may be used as
cording.
Slide the sewing threads to the left and insert three
strands of cording into the slots of H cording foot with
5 cm (2˝) extending behind the foot. Knot together the
strand ends. (The slots on H foot will hold the lengths of
cording while stitches form over them.)
Mark design on the right side of the fabric with a
washable marker.
Stitch slowly and smoothly, turning the fabric as you sew
while guiding the cording over the design lines.

Single Cord For Gathering Heavy Fabric

Decrease stitch width to 3.0.
Insert a single cord in center groove of H foot. Sew over
cord.
Pull cord for desired amount of gathering. Secure ends
and distribute gathers evenly.
Lay gathered fabric over flat fabric and sew the two
fabrics together using straight stitch with stitch length at
3.0 or higher.