Table of Contents
Advertisement
During the delayed start period, it is
not possible to change the programme
or the selected delay. If you wish to do
so, you must first cancel everything by
rotating the programme selector dial to
position "0".
Select the new programme, the
options and the delayed start, then
press START/PAUSE.
If you wish to change only the options,
this can be done on condition that the
new option(s) is(are) compatible with
the programme. Set the machine to
PAUSE by depressing the relevant but-
ton, select the new option(s) and
depress START/PAUSE button again.
If you wish to add some laundry while
the machine is performing the count-
down, after having done so and having
closed the door, press START/PAUSE
again, in order to allow the machine to
complete the remaining countdown
time.
Select the Start/Pause
Press this button to start the dryer after
having selected the programme and
the options.
The relevant light will stop flashing. If
the door of the appliance or the small
door at the bottom is opened while the
programme is running, this button
must be pressed again after closing
the door in order to restart the pro-
gramme from the point at which it was
interrupted. In both cases the light of
the Start/Pause button flashes to
remind you that the start button needs
to be pressed again.
I I n n d d i i c c a a t t o o r r l l i i g g h h t t s s
These lights indicate the following
functions:
" " D D r r y y i i n n g g " " l l i i g g h h t t
This light indicates that the appliance is
in the drying phase.
" " C C o o o o l l i i n n g g " " l l i i g g h h t t
This light indicates that the appliance is
in the cooling phase. At the end of
drying, there is a 5 minute cooling
phase to cool the laundry.
" " E E n n d d o o f f p p r r o o g g r r a a m m m m e e " " l l i i g g h h t t
This light is on at the end of the cooling
phase, during the anti-creasing phase
and at the end of the programme.
" " F F i i l l t t e e r r c c l l e e a a n n i i n n g g " " l l i i g g h h t t
It comes on every cycle to remind you
that the filter must be cleaned.
At the end of the programme
All drying programmes end with a 5
minute cooling phase.
If the laundry is not removed at the end
of the cycle, the dryer performs an
anti-creasing phase (duration: 30 min-
utes maximum).
If you do not remove the laundry, the
dryer will stop automatically at the end
of the anti-creasing phase.
Lights end and filter remain lit and the
buzzer sounds for 2 minutes.
Turn the programme selector dial to "0";
all the lights go out. The appliance is
switched off.
Remove the laundry.
use electrolux 11
GB
Advertisement
Table of Contents
