Muting The System; Listening To Preset Stations - Boston Acoustics Recepter Owner's Manual

Muting the system

Radio – Choosing the AM/FM band
Manually tuning to a station
Entering stations into preset memory

Listening to preset stations

Clearing stations from preset memory
Pressing the Mute button on the Remote Control will mute all sound.
The Radio will remain silent until the Mute button or a volume control is
used. Turning off the Radio will also cancel the mute command.
Push the Tuning knob or the Enter button on the Remote Control
to select the source: "-AM-", "-FM-", "-Presets-", and "-AUX-".
The Tuning knob tunes the radio, sets the time, and controls the Setup Menu.
After choosing either the AM or FM band, turn the Tuning knob until
the desired station is selected or press the Select Up or Select Down
buttons on the Remote Control.
1. Tune the Radio to a desired station.
2. Press and hold the Store Preset button for 2 seconds.
3. The display will show the preset station number in the upper-left corner
of the display. Note: Stations will store in the order that they were
entered into memory, regardless of whether they are FM or AM stations.
1. Push the Tuning knob until the "-Presets-" display appears.
2. Turn the Tuning knob or Select Up or Select Down buttons
on the Remote Control to select the preset you wish to listen to.
1. Push the Tuning knob until the "-Presets-" display appears.
2. Turn the Tuning knob to the preset you wish to clear.
3. Press and hold the Clear Preset button for 2 seconds until the
"-Presets Empty-" display appears. When a station is cleared from
memory, the Radio will mute until the tuning knob is turned again.
Note: Holding the clear preset button for 10 seconds will clear ALL
the preset stations.
7