Download Print this page
Boston Acoustics Recepter-P User Manual

Boston Acoustics Recepter-P User Manual

Boston acoustics recepter-p: user manual

Advertisement

Quick Links

B O S T O N A C O U S T I C S R E C E P T E R R A D I O
IMPORTANT SAFETY INSTRUCTIONS
This symbol found on the apparatus indicates hazards
arising from dangerous voltages.
This symbol found on the apparatus indicates the user
should read all safety statements found in the user manual.
This symbol found on the apparatus indicates
double insulation.
Warning!
To reduce the risk of fire or electrical shock, do not
expose this apparatus to rain or moisture.
Read these instructions.
1.
2.
Keep these instructions.
Heed all warnings.
3.
4.
Follow all instructions.
Do not use this apparatus near water.
5.
6.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with
7.
the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat
8.
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly
10.
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified by the manufacturer.
11.
Unplug this apparatus during lightning storms or when unused for
12.
long periods of time.
13.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
14.
Maintain a minimum distance of 2" (50mm) around the front, rear,
and sides of the apparatus for sufficient ventilation. The ventilation
should not be impeded by covering the ventilation openings or
placing on or around the apparatus items such as newspapers,
table-cloths, curtains, etc.
No open flame sources, such as lighted candles, should be
15.
placed on the apparatus.
The apparatus shall not be exposed to dripping or splashing.
16.
No objects filled with liquids, such as vases, shall be placed on
the apparatus.
This equipment has been tested and found to comply with
Note:
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modifications to the receiver could
Caution:
void the user's authority to operate the equipment.
T M

Advertisement

loading

Summary of Contents for Boston Acoustics Recepter-P

  • Page 1 B O S T O N A C O U S T I C S R E C E P T E R R A D I O IMPORTANT SAFETY INSTRUCTIONS This symbol found on the apparatus indicates hazards arising from dangerous voltages. This symbol found on the apparatus indicates the user should read all safety statements found in the user manual.
  • Page 2 The Boston Acoustics Recepter ™ Radio’s surprising performance is made possible by Boston Acoustics’ many years of experience in designing and manufacturing high-performance audio equipment. The key to the Radio’s sound is its Boston-designed wide-range driver. Optimized specifically for the Radio, it is combined with an actively-equalized amplifier that that uses proprietary Boston BassTrac at low volume.
  • Page 3 ENTERING STATIONS INTO PRESET MEMORY Manually tune to desired station. store preset Press and hold the button for 1 second until you hear a beep confirmation. The display will show the preset station number in the upper left corner of the display. Stations will store in the order that they were entered into Note: memory, regardless of whether they are FM or AM stations.
  • Page 4 Connect the wires of the external AM antenna to these terminals. © 2002. All rights reserved. Boston Everywhere, the Boston Sound and Recepter are trademarks and BassTrac, Boston, Boston Acoustics, and the Boston logo are registered trademarks of Boston Acoustics, Inc. 042-001642-0...

This manual is also suitable for:

Recepter