Setting A Programme - Electrolux EWF 1062 ECU User Manual

12 www.electrolux.com
3.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
– Do not set the prewash phase.
– Do not set the delay start.

9.3 Setting a programme

1. Turn the programme knob and set
the programme:
– The indicator of the
2.
If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something incorrect, the
indicator
9.4 Starting a programme
without the delay start
Press the
• The indicator of the
and stays on.
• The programme starts, the door locks,
the indicator
• The drain pump can operate for a short
time when the appliance fills water.
9.5 Starting a programme with
the delay start
• Press
set. The indicator of the set delay is on.
The indicator
B
flashes red.
:
stops to flash
is on
to set the delay you want to
is on.
4.
• Press
– The appliance starts the countdown.
– When the countdown is completed,
flashes.
To cancel the delay start:
1. Press
pause.
2.
Press
delay goes off.
Press
gramme immediately.
9.6 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press
2. Change the options.
3. Press
tinues.
:
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
the .
to set the appliance to
until the indicator of the set
again to start the pro-
. The indicator flashes.
again. The programme con-