6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the headlight bulb socket
cover.
8. Install the headlight unit by install-
ing the screws.
9. Have a Yamaha dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
6-30
EAU24133
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
6
[ECA10681]