Replacing The Tail/Brake Light Bulb - Yamaha YBR125 Custom Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Headlight bulb
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
6
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
CAUTION:
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
EWA10790
1. Do not touch the glass part of the bulb.
6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the headlight bulb socket
cover.
8. Install the headlight unit by install-
ing the screws.
9. Have a Yamaha dealer adjust the
ECA10660
headlight beam if necessary.
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
1. Screw
2. Remove the defective bulb by
6-30
removing the screws.
1
pushing it in and turning it counter-
clockwise.
EAU24131