Yamaha YZF-R125 Owner's Manual page 18

INSTRUMENT AND CONTROL FUNCTIONS
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
G
a fuel meter
3
TIP
G Be sure to turn the key to "ON" be-
fore using the "RESET/ SELECT"
button.
G
For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilometers
and miles, press the "RESET/SE-
LECT" button for at least eight sec-
onds.
Odometer and tripmeter modes
A brief push (less than one second) on
the "RESET/SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP 1" and "TRIP 2" in the following
order:
ODO → TRIP 1 → TRIP 2 → ODO
When approximately 1.6 L (0.42 US
gal, 0.35 Imp.gal) of fuel remains in the
fuel tank, the odometer display will au-
tomatically change to the fuel reserve
tripmeter mode "F-TRIP" and start
counting the distance traveled from that
point, and the last segment of the fuel
meter will start flashing. In that case,
pushing the "RESET/SELECT" button
switches the display between the vari-
ous tripmeter and odometer modes in
the following order:
F-TRIP → TRIP 1 → TRIP 2 → ODO →
F-TRIP
To reset a tripmeter, select it by push-
ing the "RESET/SELECT" button briefly
(less than one second), and then push
the button again for at least three sec-
onds while the selected tripmeter is
flashing. If you do not reset the fuel re-
serve tripmeter manually, it will reset it-
self automatically and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
3-4
Fuel meter
1. Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards "E" (Empty) as the fuel level
decreases. When the last fuel meter
segment starts flashing, refuel as soon
as possible.