Indicator And Warning Lights - Yamaha YZF-R125 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
To unlock the steering
3
1. Push.
2. Turn.
Push the key into the main switch, and
then turn it to "OFF" while still pushing
it.

Indicator and warning lights

1. Neutral indicator light " "
2. Turn signal indicator light "
3. High beam indicator light "
4. Engine trouble warning light "
5. Coolant temperature warning light "
Turn signal indicator light "
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.
3-2
EAU11004
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Coolant temperature warning
light " "
This warning light comes on if the en-
gine overheats. If this occurs, stop the
engine immediately and allow the en-
gine to cool.
" The electrical circuit of the warning light
"
can be checked by turning the key to
"
"ON". The warning light should come
"
on for a few seconds, and then go off.
If the warning light does not come on
EAU11020
initially when the key is turned to "ON",
"
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
NOTICE
EAU11060
"
Do not continue to operate the en-
gine if it is overheating.
EAU11080
"
EAUM2294
ECA10021