Clutch Lever - Yamaha YZF-R125 Owner's Manual

Pass switch "PASS"
Press this switch to flash the headlight.
Dimmer switch " / "
Set this switch to " " for the high
beam and to " " for the low beam.
Turn signal switch " /
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Engine stop switch " /
Set this switch to " " before starting
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
INSTRUMENT AND CONTROL FUNCTIONS
EAU12360
Start switch "
Push this switch to crank the engine
with the starter.
EAU12400
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAU12460
"
". When re-
EAU12500
EAU12660
"
" to
EAU12710
"

Clutch lever

ECA10050
1. Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
3-10.)
3-5
EAU12820
3