Electrolux FAVORIT 50777 Instruction Book page 11

152950 34/0en 15-02-2006
NOTE: if the drying results are not satisfactory we suggest that you
activate only the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only be
possible with the 3 in 1 function active.
Activation/deactivation of the rinse aid dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been activated, the rinse aid
indicator light on the control panel is automatically activated.
1. Press the On/Off button. The On/Off indicator light illuminates
(setting mode).
If a programme button indicator light is on, this means that a
wash programme is set. The programme must be cancelled: press
simultaneously function buttons 2 and 3 for about 2 seconds.
All the indicator lights will turn off (except for the On/Off indicator
light and eventually salt and rinse aid indicator lights) indicating
that the set programme has been cancelled and the machine is
now in setting mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of the function buttons 1, 2, 3 and 4 start flashing.
3. Press function button 2, the indicator lights of function buttons 1,
3 and 4 turn off while the indicator light of function button 2 goes
on flashing, the digital display indicates the current setting.
4. To change the setting, press the function button 2 again, the
digital display indicates the new setting.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
9:22 Pagina 11
Rinse aid dispenser deactivated
Rinse aid dispenser activated
Operating instructions
11