Hardware Buttons; Buttons And Other Controls On The Screen - Isuzu GPS Navigation User Manual

●
Tap to customise the way the navigation software works.
●
Tap
live map that shows your current position, the recommended route and the surrounding
map area. Tap the button to enlarge the map to the full screen.
●
Tap to stop navigation and exit the software.

2.2 Hardware buttons

You can use Isuzu navigation mostly by tapping the touch screen.
You can turn DIR-6200 on or off at any time. When DIR-6200 is switched off, Isuzu
navigation does not calculate your GPS position and it does not update the route or the
driving instructions.
When you turn DIR-6200 on again, Isuzu navigation continues navigating as soon as
the GPS receiver has determined your position.

2.3 Buttons and other controls on the screen

When you are using Isuzu navigation, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs
to perform a major reconfiguration, or you are about to lose some of your data or settings.
Otherwise, Isuzu navigation saves your selections and applies the new settings without
confirmation as soon as you use the controls.
Type
Button
Button
with value
Icon
9
to start navigating on the map. The button itself is a miniature
Example
Tap it to initiate a function,
to open a new screen, or
to set a parameter.
Some buttons display the
current value of a field or
setting. Tap the button to
change the value. After the
change, the new value is
shown on the button.
Shows status information.
Description How to use it
Tap it once.
Tap it once.
Some icons also function
as a button.
Tap them once.