Isuzu GPS Navigation User Manual page 14

The button gives quick access to frequently used functions. You can change the
available functions in Settings.
By default, only one data field is displayed in the bottom right corner. Tap this field to
see all route data fields. Tap any of the data fields to suppress others and display only
the selected one.
The data fields are different when you are navigating an active route and when you have
no specified destination (the orange line is not displayed). Default data fields when cruising
without a destination (tap and hold any of the fields to change its value):
Field
Default data fields when navigating a route (tap and hold any of the fields to change its value):
Field
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains it.
Shows the current time corrected with time zone offset. The accurate
time comes from the GPS satellites, and the time zone information
comes from the map or it can be set manually in Regional settings.
(The current time is always displayed in the top left corner of menu screens.)
Shows the distance you need to travel on the route before reaching
your final destination.
Shows the time needed to reach the final destination of the route
based on information available for the remaining segments of the
route.
The calculation cannot take into account traffic jams and other possible
delays.
Shows the estimated arrival time at the final destination of the route
based on information available for the remaining segments of the route.
The calculation cannot take into account traffic jams and other possible
delays.
Description
Description
14