3.1.2.6 Entering an address with a postal code
All of the above address searching possibilities can be performed with entering the postal
code instead of the city/town name. Find below an example with a full address:
1. If you are on the Map screen, tap
2. In the Navigation menu, tap the following buttons:
3. Select the country and state as described earlier (page 35).
4. Enter a new city/town using its postal code:
a. Tap
b. Tap
c. Start entering the postal code.
d. Find the city/town you need:
●
The most likely postal code is always shown in the input field. To accept it,
tap
●
If the desired number does not show up, open the list of results by tapping
5. Enter the street name:
a. Tap
b. Start entering the street name on the keyboard.
c. Find the street you need:
●
The most likely street name is always shown in the input field. To accept it,
tap
45
.
to open the numeric keypad.
.
. Select the postal code from the list.
.
.
to return to the Navigation menu.
,
.
Need help?
Do you have a question about the GPS Navigation and is the answer not in the manual?