Changing The Road Types Used In Route Planning - Isuzu GPS Navigation User Manual

3.4.9 Changing the road types used in route planning

To recalculate the active route with different road type preferences, do as follows.
These changes can also be made in Settings (page 97).
1. On the Map screen, tap
2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road
types. You have the following options (their order depends on the selected vehicle type):
●
a slow car or you are towing another vehicle.
●
pass or vignette to use the road for a longer period of time. They can be enabled
or disabled separately from toll roads.
●
there is a per-use charge) in the routes by default. If you disable toll roads, Isuzu
navigation plans the best toll-free route.
●
default. However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
●
unsealed roads can be in a bad condition and usually you cannot reach the speed
limit on them.
●
They can only be driven by 4WD vehicles.Isuzu navigation excludes 4WD tracks
by default.
3. The route has already been recalculated. Tap
screen. The orange line now shows the new recommended route.
and then tap
- You might need to avoid motorways when you are driving
- Charge roads are pay roads where you can purchase a
- Isuzu navigation includes toll roads (pay roads where
- Isuzu navigation includes ferries in a planned route by
- Isuzu navigation excludes unsealed roads by default:
- 4WD tracks are dirt roads in very poor condition.
.
to return to the Map
74