Table of Contents
Advertisement
Malfunction
The freezer temperature is
not sufficient, red light
lights up, temperature
alarm signal sounds.
Heavy build up of frost,
possibly also on the door
seal.
Unusual noises.
The compressor does not
start immediately after
changing the temperature
setting.
Important: regularly check on the red temperature pilot lamp and
thermometer that the storage temperature is being mantained.
42
Possible Cause
Temperature is not pro-
perly adjusted.
Door was opened for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Disturbance on the appli-
ance.
Door seal is not air tight
(possibly after changing
over the hinges).
Appliance is not level.
The appliance is touching
the wall or other objects.
A component, e.g. a pipe,
on the rer of the appliance
is touching another part of
the appliance or the wall.
This is normal, no error has
occurred.
Remedy
Please look in the "Initial
Start Up" section.
Open the door only as long
as necessary. Press the fast
freeze switch.
Press the fast freeze
switch.
Please, look in the
"Installation Location" sec-
tion.
Switch on the fast freeze
switch, keep the freezer
closed, inform your custo-
mer service.
Carefully warm the leaking
sections of the door seal
with a hair dryer (not hot-
ter than approx. 50°C). At
the same time shape the
warmed door seal by hand
such that it sits correctly.
Readjust the feet.
Move the appliance slight-
ly.
If necessary, carefully bend
the component out of the
way.
The compressor starts after
a period of time.
Hide quick links:
Advertisement
Table of Contents
