Plug Socket; Rehingeing The Door - AEG ÖKO-ARCTIS SUPER Operating Instructions Manual

Warning! A cut-off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

Plug socket

The plug socket necessary for connection of your appliance to the elec-
tricity supply should be positioned so that it is possible to pull out the
appliance plug.
A concealed protective contact plug socket requires 10 A/16 A fusing.

Rehingeing the door

The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the
appliance may not be connected to the mains. Remove plug from the
mains beforehand.
Tilt the appliance slightly towards
the rear and drop it securely.
Unscrew the door hinge screws (K)
and take the door bearing (1)
downwards out of its cavity.
Open the door a little way and take
it out downwards.
Unscrew the upper pin (A) and srew
it into place on the opposite side.
Fit the door into the upper pin (A)
and close it.
Insert the pin of the door bearing
(1) into the left hand cavity and
screw the bearing firmly into place
with the screws (K).
AEG97
12
A
AEG98
1
K
31