Hyundai HDT-H24 User Manual page 9

Custom Options
PERSONALIZING YOUR HANDSET'S SOUNDS
Setting your handset's ringer melody
1. Press MENU .
SOUND
2. Select . Press OK .
HS RINGER.
3. Select Press OK .
MELODY
4. Select . Press .
OK
5. Select the melody you want. Press OK
Setting your handset's ringer volume
1. Press .
MENU
SOUND
2. Select . Press OK .
HS RINGER.
3. Select Press .
OK
VOLUME
4. Select . Press OK .
5. Select the volume level. Press to confirm. The new setting is saved.
OK
Setting the key tone
Key tone is the sound you hear when you press a key on your handset.
1. Press .
MENU
2. Select SOUND . Press .
OK
HS KEY TONES
3. Select . Press OK .
4. Select the new setting. Press to confirm. The new setting is saved.
OK
Setting the handset tones
Handset tones will sound upon a successful or unsuccessful operation.
1. Press .
MENU
SOUND
2. Select . Press OK .
HS TONES
3. Select . Press OK .
4. Select the new setting. Press OK to confirm. The new setting is saved.
20
to confirm. The new setting is saved.
CHECKING THE BATTERY LEVEL
The battery icon displays the current battery level.
= 100% full = 60% full
charging.
Your handset may power down shortly if it is not charged after the battery is empty. If you are on the
phone while the battery is nearly empty, you will hear warning tones. Your call maybe cut off shortly
after the warning.
WHAT IS STANDBY MODE?
Your phone is in standby mode when it is idle. The standby screen displays the handset name,
the signal icon, and the battery icon.
SETTING YOUR PHONE'S COUNTRY
This feature is not applicable for use in SINGAPORE
It is necessary to setup your phone in order for it to work properly according to your country's
standards.
1. Press during standby mode.
MENU
2. Enter the country code.
Country Code
3. Press . Your phone is now ready to use.
OK
REGISTERING YOUR HANDSET
Registration allows communication between your base unit and handset(s). If your handset is not
registered, you will not be able to make a call or use some of the functions and features on the
phone.
NOTE:
Your handset shall be already registered in the box.
To register your handset to an additional base unit, see Registering your handset with additional
UNREGISTERED
base on page 23. If your handset displays
handset.
1. Press on the base unit for 4 seconds.
2. Press on the handset.
MENU
SYSTEM
3. Select . Press .
OK
REGISTER
4. Select . Press .
OK
5. Use to select the base number you want.
6. Enter the system PIN (Pre-set: 0000). Your handset starts searching for the base.
Registration shall be completed within 30 seconds. If registration is successful, the
signal icon displays steadily. If registration failed, repeat the above procedure.
9
Call
= 30% full = Empty. Require
Country Code
, follow the steps below to register your