Getting Started - Hyundai HDT-H24 User Manual

Getting Started

NOTE:
Low Radiation Mode. Your phone is designed with a low-radiation
mechanism; therefore the antenna switches off automatically in standby mode
and will not emit any radiation. To turn on this feature, see page 24.
CONNECTING YOUR PHONE
1. Connect the output plug of the mains
adapter to the bottom of the base
unit.
2. Connect the mains adapter to a
standard wall outlet.
3. Connect the telephone line cords to
the phone sockets at the bottom of
the base unit and the wall phone
socket.
CONNECTING YOUR CHARGERS
* For multi-pack customer only
1. Connect the power adapter of the
charger to a standard wall outlet.
CHARGING YOUR HANDSET
WARNING:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-
rechargeable batteries. Use recommended type supplied with this product. NiMH batteries must
be disposed of in accordance with the applicable waste disposal regulations.
NOTE:
Charge the handset(s) for 14 hours before initial use!
CAUTION:
Check the batteries polarity when inserting the batteries. Incorrect polarity may
damage the product.
1. Place the 2 rechargeable batteries
(included) into the battery
compartment.
2. Slide the battery door firmly into
place.
3. Place the handset on the base unit or
charger for charging.
NOTE:
Handset may get warm during
initial charge. This is normal. The
handset may take a few seconds to
power up.
8
Calling Features
Your phone supports a number of call-related features to help you handle and manage your calls.
AUTO ANSWER
Auto answer enables you to answer an incoming call by simply picking up the handset from the
charging cradle. You do not need to press a key to answer the call.
Activating/Deactivating auto answer
1. Press MENU .
SETTINGS
2. Select . Press OK .
3. Select AUTO ANSWER . Press .
OK
4. Select the new setting. Press OK to confirm. The new setting is saved.
DIAL MODE
Dial mode is the telephone signal used in your country. Your phone supports tone (DTMF) and pulse
(rotary) dialing. Your phone shall already be set up for use in your country. For details, consult your
service provider.
Selecting dial mode
1. Press MENU .
SETTINGS
2. Select . Press OK .
DIAL MODE
3. Select . Press OK .
4. Select the new setting. Press to confirm. The new setting is saved.
OK
TIP:
Temporary Tone. If your phone is in pulse dialing, press and hold
tem-porary tone mode. 'd' displays. Digits entered after 'd' are sent out as tone signal (on this
call only).
RECALL SELECTION
Recall is a signal that needs to be sent to the network when making or answering a second call.
Your phone shall already be set up for use in your country. For details, consult your service
provider.
Selecting recall duration
1. Press MENU .
SETTINGS
2. Select . Press OK .
3. Select RECALL . Press .
OK
4. Select the new setting. Press OK to confirm. The new setting is saved.
21
during a call for