About Your Phone - Hyundai HDT-H24 User Manual

About Your Phone

About your phone
THE HANDSET
1 Left & Right Soft keys
Use to perform function displayed above
the key. It is displayed as text in a shaded
box (i.e. ) in this user guide.
MENU
2 Talk key & Recall key
Make and receive calls
Send a flash signal
3 End & On/Off key
End current call
Exit menu / operation
Turn handset on/ off
4 Up Navigation & Phonebook key
Scroll up menu items
Increase ringer and receiver volume
Enter phonebook record review
5 Down Navigation & Phonebook key
Scroll down menu items
Reduce ringer and receiver volume.
Enter phonebook record review
6 Digit keys
Dial digits
Enter characters
7 Star & Ringer Off key
Dial *
Turn ringer on / off
8 Pound, Keylock, & Pause key
Dial #
Enter a pause
Lock / unlock keypad
9 Speaker key
Turn the speaker on / off
10 Intercom key
Make intercom call
Start conference call
11 Call Log key
Enter incoming call log
THE BASE
1 Page key
Find handset(s)
Enter registration mode
6
The System
TIP:
Use to navigate the menus.
REGISTERING YOUR HANDSET WITH ADDITIONAL BASE
This section shows you how to register your handset to additional base unit(s). If your handset
displays UNREGISTERED , refer to Registering your handset on page 9.
1. Press on the base unit for 4 seconds.
2. Press on the handset.
MENU
SYSTEM
3. Select . Press .
OK
REGISTER
4. Select . Press .
OK
5. Use to select the base number you want.
6. Enter the system PIN (Pre-set: 0000). Your handset starts searching for the base.
This base number will be assigned to the base unit you are about to register to.
Your handset starts searching for the base.
Registration shall be completed within 30 seconds.
NOTE:
Each handset can register up to 4 base units. After registering to 4 base
units, your handset registration memory is full. If you attempt to register to
additional base units, registration will not be successful.
SELECTING A BASE UNIT
You can switch your handset between different registered base units. You can program the
handset to automatically connect to the closest base unit or only connect to a fixed base unit
you have specified.
1. Press .
MENU
SYSTEM
2. Select . Press .
OK
SELECT BASE
3. Select . Press .
OK
4. Select the base unit you want or select
automatically connect to the closet base unit.
5. Press . The new setting is saved.
OK
DELETING A HANDSET
Use one handset to delete (de-register) another handset that shares the same base unit.
1. Press .
MENU
2. Select SYSTEM . Press .
OK
DELETE HS
3. Select . Press .
OK
4. Select the handset (number) you want to delete. Press
TIP:
Handset Number. The handset number displays beside the handset name
during standby.
5. Enter the system PIN. Use to make correction.
CLEAR
AUTO
if you want your handset to
.
OK
23