Table of Contents
Advertisement
SPECIFICATIONS
1. Functionality
1.1 Recording
Data should be recorded on the optical disc in response to host computer
command.
1. Drive receives necessary information such as logical block address,
number of block and data to be recorded from the host computer.
2. Recording to pre-recorded area can not be executed. (CD-R disc)
3. Overwriting to pre-recorded area can not be executed. (CD-RW disc)
1.2 Reading
Data on optical disc should be read in response to the host computer
command.
Audio playing (CD-DA) can be executed when receiving the Audio playing
command from the host computer.
1.3 Load/Eject of Disc
1. Load
Place the disc on the disc tray. Load the disc by pushing the eject
button or by lightly pushing in the disc tray.
2. Eject
Operator can eject the Disc Tray (Disc) by pushing this button.
1.4 Spindle Motor Start/Stop
This controller of the drive senses the disc to be set on the turn-table
connected with the spindle motor and then starts to rotate the spindle
motor, in response to the host computer command.
6
Advertisement
Table of Contents
