Table of Contents
Advertisement
2.1 Disc Tray
This is the tray for the disc. Place the disc on the ejected disc tray, then
lightly push the tray (or push the eject button) and the CD will be loaded.
Caution: Don' t use force to pull out or push in the disc tray.
This might cause damage to the loading section of the drive.
2.2 Eject Button
This is the button used to eject or bring in the disc tray.
2.3 Busy Indicator
When the disc tray or disc is being accessed, the light shines or flashes
orange.
Even when a disc is loaded or a disc is not being accessed, the light go
out.
When an illegal disc is loaded or some hardware trouble occurs, the
indicator blinks.
2.4 Headphone Jack
This jack is for connecting headphones or mini-speakers.
2.5 Volume Control
This is used to adjust the output volume of the headphone jack. It can't be
used to adjust the output volume for the audio output connectors on the
rear panel.
2.6 Emergency Eject hole
When the drive can not eject the Disc Tray because of power failure,
pushing the Emergency Eject hole of the Front Panel by the thin pole make
drive be able to eject the Disc Tray.
Caution: This function is only for emergency case. Do not use
this function in usual case to prevent from mechanical
damage.
2.7 Power Connector
4
Advertisement
Table of Contents
