Table of Contents
Advertisement
Specification
Writing Speed Control (JustSpeed):
JustSpeed is the function that prevents writing error when high writing speed is
selected. When JustSpeed is ON, the drive decides the most appropriate writing
speed according to the result of medium calibration (using the ATIP information, such
as maker name, model-number, etc. pre-recorded in disc) and writes with the speed.
This function is changeable in "mode select command", and the default setting is
"JustSpeed" is ON.
Running Optimum Power Control (ROPC):
During the process of high-speed recording/writing, an unbalanced optical
disc will wobble slightly; under CLV (Constant Linear Velocity) mode,
recording/writing quality will decrease due to this wobble and the constant
power. However, by adopting the ROPC technique, the device can adjust
its power by detecting feedback signals from the disc so as to create
optimal writing / recording quality.
Perfect Compatibility with blank media
As far as users of CD/DVD Writers are concerned, what they care
about most is compatibility of blank media, writing/recording quality and
access performance. Taking advantage of a global operation system,
we collected and tested most brands of blank media available on the
market place in order to optimize and adjust our CD/DVD Writer
products. Combining with other relevant systems and special
technologies (e.g. JustLink and JustSpeed), these drives obtain optimal
access and recording/writing quality. We had collected and tested almost every brand
of blank media, and the results show that compatibility with our CD/DVD writer
products is incontestable. Users may visit our website
the most up-to-date information about media compatibility.
http://english.aopen.com.tw
-- E-29 --
English
for
Advertisement
Table of Contents
