Technical Data - Electrolux WA GL6 S 101 User Manual

20 electrolux
Problem
Spinning starts late or the machine does not
spin:
The machine makes an unusual noise:
No water is visible in the drum:

Technical data

Dimensions
Electrical connection
Voltage - Overall power - Fuse
Water supply pressure
Maximum Load
Spin Speed
The electronic unbalance detection device has
cut in because the laundry is not evenly distrib-
uted in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen
several times before the unbalance disappears
and normal spinning can resume. If, after some
minutes, the laundry is still not evenly distributed
in the drum, the machine will not spin.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manually
and then select the spinning programme.
The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a soft-
er start and more even distribution of the laundry
in the drum when spinning, as well as increased
stability of the machine.
Machines based on modern technology operate
very economically using very little water without
affecting performance.
If you are unable to identify or solve the prob-
lem, contact our service centre. Before tele-
phoning, make a note of the model, serial
number and purchase date of your machine:
the Service Centre will require this informa-
tion.
Width
Height
Depth
Depth (Overall dimensions)
Information on the electrical connection is given on the rating plate,
on the inner edge of the appliance door.
Minimum
Maximum
Cotton
Maximum
Possible cause/Solution
60 cm
85 cm
43 cm
48 cm
0,05 MPa
0,8 MPa
6 kg
1200 rpm