Becker TRAFFIC ASSIST Operating Instructions Manual page 43

Setting Meaning
Allowed With this option, the
corresponding road type
is included in the route
calculation.
Avoid With this option, wher-
ever possible, the corre-
sponding road type is
avoided.
Not permitted With this option, the
corresponding road type
is not included in the
route calculation.
Saving destination
The button opens an entry menu for
Save
entering a name for the destination en-
tered. If a name has been entered and
adopted using , the destination is
OK
transferred to rapid access and protected
there. The entry menu allows you to
change between upper and lower case let-
ters.
Starting navigation
The button can be used to start nav-
Start
igation straight away. All the data entered
so far is processed in the route calculation.
> Press the
key to start navigation.
Start
The route is calculated. The map display
then appears and directions to the destina-
tion begin.
NAVIGATIONAL MODE
Note:
If no GPS signal is available at the time of
route calculation, the following display
appears.
If the GPS signal is available, route calcu-
lation is started automatically.
A short route to the selected destination
is displayed when
Simulation
A stored demonstration route guidance is
displayed when is pressed.
Demo
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
is pressed.
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
43