Volume Control; Map Data; Installation Program; Transferring Files - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

>>> GERNERAL OPERATION

Volume control

> EN The volume can be adjusted both via the
integrated volume control on the Traffic
Assist and in the various applications.
Note:
A description of volume adjustment in
the various applications is described in
the individual chapters.
1
The volume control
right side of the unit Traffic Assist.
> In order to increase or reduce the vol-
ume, press the volume control upward
or downward.
or
> Press the volume control in order to
mute the Traffic Assist.
34

Map data

The memory card is supplied with the
map data already preinstalled.
If you should lose the supplied memory
card or if it should become defective, the
map set can be installed on another mem-
ory card. You can install it using the in-
stallation program on the DVD.

Installation program

There is a map installation program on
the map DVD. Once the DVD is inserted
in a personal computer's DVD drive, this
program will usually start up automatical-
ly. The program guides you through the
installation process.
is located on the
1
Otherwise, you will have to start the pro-
gram manually.
> Open Windows
> Select your DVD drive folder.
> Double-click on the "Setup.exe" file.

Transferring files

Files can be transferred indirectly via the
memory card or directly via the USB port.
Note:
Only the maps supplied in the Traffic As-
sist may be used. The installation or
transfer of files or programs which limit
or modify the function of the Traffic As-
sist is prohibited!
Transferring using the SD
card reader
The simplest and fastest form of transfer is
to use a standard SD card reader (does not
fall within the scope of supply). The
memory card is plugged into this.
The files required are then saved on
®
Explorer. the memory card using the computer's
software.