Outline Of Settings - Epson STYLUS PHOTO R300 Series Operation Manual

Outline of settings

Setting
BT Device Name
Setting
BT Communicati
on Mode
BT Encryption
BT Passkey
Setting
BT Device
Address
Choices
printer
name-(number)
(Default = 0)
Public
Private
Bonding
On/Off
(Default = Off)
Any four-digit
number
(Default = 0000)
Set at the factory
(Example)
11-11-11-11-11-11
Description
If multiple printers enabled with
Bluetooth are in the same
communication range, distinguish
them by assigning each a number
from 0 through 9.
To make the Device Name Setting
take effect, turn the printer off and
then back on.
This mode allows devices enabled
with Bluetooth to freely discover the
printer and print.
This mode prevents unknown
devices from discovering the printer.
To print in Private mode, first search
for the printer once in Public mode.
After your device has discovered
the printer in Public mode once, it
will subsequently be able to
communicate with and print from it
in Private mode.
This mode requires that the four-digit
Passkey be entered into a device
before it can communicate with
and print from the printer.
Select On to encrypt
communication. Encryption
requires that the four-digit Passkey
be entered into a device before it
can communicate with and print
from the printer.
The Passkey Setting allows you to set
the four-digit Passkey that must be
entered into a device before
printing if Bonding is selected as the
Communication Mode or if
Encryption is On.
Displays the unique Bluetooth
Device Address of the printer.
99