Fit To Frame; Bidirectional Printing - Epson STYLUS PHOTO R300 Series Operation Manual

Fit to Frame

This setting automatically trims the parts of an image that extend
beyond the margins of the selected print size. Either the top and
bottom areas or the left and right areas of the image will be
trimmed, depending on the aspect ratio of the original photo and
the selected print size. The default setting is On.
On
Off
Resize each photo (without trimming it) so that it fits inside the
print area specified on the Layout menu. Margins may appear at
the left and right of the photo, depending on the print size and
aspect ratio.
Quality
This setting allows you to adjust the quality of your printouts. The
default setting is High.

Bidirectional Printing

This setting activates bidirectional printing so your printer prints
both left-to-right and right-to-left. Bidirectional printing speeds
up printing, but decreases print quality. By default, this setting is
On.
Note:
If misaligned, vertical lines appear during bidirectional printing, you
may need to align the print head. To align the print head, see "Aligning
the Print Head" on page 74.
48
Trims the image.
Does not trim the image