Setting Or Changing The Start Delay - AEG FAVORIT 86050 VI User Instructions

4. Close the dishwasher door.
The newly selected dishwashing cycle will commence from the begin-
ning.
Interrupting the dishwashing cycle by opening the dishwasher door
0 1. Open the door of the dishwasher.
The dishwashing cycle will stop.
2. Close the dishwasher door.
The dishwashing cycle will continue.
Aborting the dishwashing cycle (RESET)
0 1. Open the door of the dishwasher.
2. Press the function buttons 1 and 2 simultaneously and keep them
pressed.
The programme display for the current programme will flash for several
seconds and then go out.
3. Release the function buttons.
The dishwashing cycle has been aborted.
4. Switch off the dishwasher by pressing the ON/OFF button.

Setting or changing the start delay

Using the start delay you can set whether a dishwashing cycle is to
begin in 3, 6 or 12 hours.
Setting the start delay:
1. Open the door of the dishwasher
0
2. Press the ON/OFF button.
3. Continue pressing the delay timer button b until the indicator next
to the number of hours until the dishwashing cycle is to begin is illumi-
nated.
4. Press the button for the desired dishwashing cycle.
The LED indicator for the cycle selected and the indicator next to the
number of hours are illuminated.
5. Close the door.
The dishwashing cycle will start automatically following a countdown
of the hours set.
Changing the start delay:
As long as the dishwashing cycle has not started, you can still change
the start delay set by pressing the delay timer button.
Operating Instructions
31