Tail/Brake Light; Replacing A Turn Signal Light Bulb; License Plate Light - Yamaha MidnightStar XV1900A Owner's Manual

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24181
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw, and then
turning the lens counterclockwise.
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by turning it clock-
wise, and then installing the screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
EAU38380

License plate light

If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
ECA11190
6-28
EAU24330
6