Yamaha MidnightStar XV1900A Owner's Manual page 23

Brightness control mode
1. Multi-function meter unit panel
2. LCD
3. Speedometer needle
4. Tachometer needle
5. Fuel gauge needle
The brightness can be adjusted for the
following:
G
the multi-function meter unit panel
(item number "1")
G the LCD (item number "2")
G
the speedometer, tachometer, and
the fuel gauge needles (item num-
ber "3")
Select the brightness control mode as
follows.
1. Turn the key to "OFF".
2. Push and hold the "SELECT"
switch.
INSTRUMENT AND CONTROL FUNCTIONS
3. Turn the key to "ON", and then re-
lease the "SELECT" switch after
five seconds.
Item number "1" is displayed.
1. Multi-function meter unit panel
2. Item number
3. Brightness level
4. Adjust the multi-function meter unit
panel brightness level by pushing
the reset switch.
5. Push the "SELECT" switch to se-
lect the LCD.
Item number "2" is displayed.
Adjust the LCD brightness level by
pushing the reset switch.
3-9
1. LCD
2. Item number
3. Brightness level
6. Push the "SELECT" switch to se-
lect the speedometer, tachometer,
and the fuel gauge needles.
Item number "3" is displayed.
Adjust the brightness level of the
speedometer, tachometer, and the
fuel gauge needles by pushing the
reset switch.
3