Checking The Brake Fluid Level - Yamaha TZR50 Owner's Manual

disappeared, have a Yamaha dealer
replace the brake pads as a set.
Rear brake pads
1. Brake pad wear indicator grove
Each rear brake pad is provided with
a wear indicator groove, which allows
you to check the brake pad wear wit-
hout having to disassemble the brake.
Check the brake pad wear as follows.
1. Remove the brake caliper bolt,
and then tilt the caliper forward to
inspect the wear indicator groo-
ve. If a brake pad has worn to the
point that the wear indicator gro-
ove has almost disappeared,
have a Yamaha dealer replace
the brake pads as a set.
PERIODIC MAINTENANCE AND MINOR REPAIR
2. Install the brake caliper bolt, and
then tighten it to the specified
torque.
EAU22480
Tightening torque:
Brake caliper bolt:
30 Nm (3.0 m.kgf, 21.7 ft.lbf)
1 1
Checking the brake fluid
level
Front
Rear
Insufficient brake fluid may allow air
to enter the brake system, possibly
causing it to become ineffective.
Before riding, check that the brake
6-19
EAU22580
min
6
max.
min.