Multi-Function Display - Yamaha FZ6-SA Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Multi-function display

WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
3
1. Speedometer
2. Fuel meter
3. Coolant temperature meter
4. "SELECT" button
5. "RESET" button
6. Clock/air intake temperature display
7. Odometer/tripmeters/fuel reserve tripme-
ter/digital tachometer
The multi-function display is equipped
with the following:
G
a speedometer (which shows the
riding speed)
G
EAU32978 two tachometers, one LCD and
one digital (which show engine
EWA12311
r/min)
G an odometer (which shows the to-
tal distance traveled)
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the bottom segment of the fuel
meter started flashing)
G
a clock
G
an air intake temperature display
G
a fuel meter
G a coolant temperature meter
G a self-diagnosis device
NOTE:
G
Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons.
G For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilometers
and miles, press the "SELECT"
button for at least two seconds.
Odometer, tripmeter and digital ta-
chometer modes
1. Odometer/tripmeters/fuel reserve tripme-
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP 1" and "TRIP 2" ("TRIP F") and
the tachometer "E" in the following or-
der:
ODO → TRIP 1 → TRIP 2 → (TRIP F)
→ E → ODO
When the fuel amount in the fuel tank
decreases to 3.6 L (0.95 US gal) (0.79
Imp.gal), the bottom segment of the
fuel meter will start flashing, and the
odometer display will automatically
change to the fuel reserve tripmeter
mode "TRIP F" and start counting the
3-6
ter/digital tachometer