Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha FZ6-NHG Owner's Manual

Replacing the tail/brake light
bulb
1. Remove the seat. (See page
3-19.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise. WARNING! Do not
touch the muffler bracket until
the exhaust system has cooled.
[EWA12302]
3
1. Tail/brake light bulb socket
2. Muffler bracket cover
3. Muffler bracket
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU32824 4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the seat.
1
2
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
1. Screw
2. Turn signal light lens
2. Remove the burnt-out bulb by
3. Insert a new bulb into the socket,
4. Install the lens by installing the
6-33
by removing the screw.
pushing it in and turning it counter-
clockwise.
push it in, and then turn it clock-
wise until it stops.
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]
EAU24204
6