Yamaha FZ6-NHG Owner's Manual page 76

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Do not touch the glass part of the bulb.
1. Remove the headlight unit by re-
moving the bolts on each side.
6
1. Bolt
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1. Headlight bulb cover
2. Headlight coupler
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1. Headlight bulb holder
2. Headlight bulb
6-32
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the bolts.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.