Helmet Holder; Storage Compartment - Yamaha FZ6-NHG Owner's Manual

1. Projection
2. Seat holder
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
NOTE:
Make sure that the seat is properly se-
cured before riding.
INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

1. Helmet holder
2. Unlock.
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
3-19
EAU14281

Storage compartment

1. CYCLELOK bar (optional)
2. Yamaha CYCLELOK (optional)
3. Strap
This storage compartment is designed
to hold a
CYCLELOK. (Other locks may not fit.)
When placing a CYCLELOK in the stor-
age compartment, securely fasten it
with the strap. When the CYCLELOK is
EWA10160
not in the storage compartment, be
sure to secure the strap to prevent los-
ing it.
WARNING
G
Do not exceed the load limit of 3
kg (7 lb) for the storage com-
partment.
EAU42910
3
genuine Yamaha
EWA10961