Yamaha Fazer FZ1-S Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
Fuel meter
3
1. Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards "E" (Empty) as the fuel level
decreases. When the last segment on
the left starts flashing, refuel as soon as
possible.
TIP
This fuel meter is equipped with a self-
diagnosis system. If a problem is de-
tected in the electrical circuit, the follow-
ing cycle will be repeated until the
malfunction is corrected: "E" (Empty),
"F" (Full) and symbol " " will flash
eight times, then go off for approxi-
mately 3 seconds. If this occurs, have a
Yamaha dealer check the electrical cir-
cuit.
Coolant temperature mode
1. Coolant temperature display
The coolant temperature display indi-
cates the temperature of the coolant.
Push the "RESET" button to switch the
coolant temperature display to the air
intake temperature display.
TIP
When the coolant temperature display
is selected, "C" is displayed for one
second, and then the coolant tempera-
ture is displayed.
3-10
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Air intake temperature mode
1. Air intake temperature display
The air intake temperature display indi-
cates the temperature of the air drawn
into the air filter case. Push the "RE-
SET" button to switch the coolant tem-
perature display to the air intake
temperature display.
TIP
G Even if the air intake temperature
is set to be displayed, the coolant
temperature warning light comes
on if the engine overheats.
ECA10021