Yamaha Fazer FZ1-S Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
Fuel meter
3
1. Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards "E" (Empty) as the fuel level
decreases. When the last segment on
the left starts flashing, refuel as soon as
possible.
NOTE:
This fuel meter is equipped with a self-
diagnosis system. If the electrical circuit
is defective, the following cycle will be
repeated until the malfunction is cor-
rected: "E" (Empty), "F" (Full) and
symbol " " will flash eight times, then
go off for approximately 3 seconds. If
this occurs, have a Yamaha dealer
check the electrical circuit.
Coolant temperature mode
1. Coolant temperature display
The coolant temperature display indi-
cates the temperature of the coolant.
Push the "RESET" button to switch the
coolant temperature display to the air
intake temperature display.
NOTE:
When the coolant temperature display
is selected, "C" is displayed for one
second, and then the coolant tempera-
ture is displayed.
3-10
CAUTION:
Do not operate the engine if it is
overheated.
Air intake temperature mode
1. Air intake temperature display
The air intake temperature display indi-
cates the temperature of the air drawn
into the air filter case. Push the "RE-
SET" button to switch the coolant tem-
perature display to the air intake
temperature display.
NOTE:
G Even if the air intake temperature
is set to be displayed, the coolant
temperature warning light comes
on when the engine overheats.
ECA10020