What To Do If; Remedying Faults - AEG LAVAMAT Princess 5250 User Information

Instructions for use

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
Problem
The washing machine
does not work.
The door cannot be
closed.
The END (ENDE, FIN)
indicator flashes
4 times.
The END (ENDE, FIN)
indicator flashes once.
28
Possible Cause
The power plug is not
connected.
A domestic fuse has tripped.
The door is not closed prop-
erly.
The START/PAUSE (START/
PAUSE, MARCHE/PAUSE)
button was not pressed for
long enough.
The child safety device is
engaged.
The door is not closed
properly.
The water tap is closed.
The filter in the threaded in-
let hose fitting is blocked.
Water tap is furred with
limescale or faulty.
Remedy
Connect the plug to a power
outlet.
Replace the fuse.
Close the door;
there should be an audible
click.
Press and hold the START/
PAUSE (START/PAUSE,
MARCHE/PAUSE) button un-
til the programme starts.
Release the child safety de-
vice (see section "Child safety
feature").
Close the door properly.
Re-start the programme.
Open the water tap. Re-start
the programme.
Switch off the washing ma-
chine:
Close the water tap. Remove
the plug from the mains, un-
screw the hose from the wa-
ter tap, take out the filter
and wash it in running water.
Check the water tap and
have it repaired, if necessary.