Wash Programme Progress; Changing The Wash Programme - AEG LAVAMAT Princess 5250 User Information

Instructions for use

Wash Programme Progress

Programme Progress Display
Before the programme starts, the steps to be carried
out are indicated on the Programme Progress Display.
During the wash programme, this indicates the cur-
rent stage of the programme.

Changing the Wash Programme

Changing or cancelling the programme
1. Press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button.
2. Turn the programme knob to OFF (AUS, ARRET). The wash programme is
cancelled.
3. Set another wash programme, if required. Otherwise, turn the pro-
gramme knob to DRAIN (PUMPEN, VIDANGE) or SPIN (SCHLEUDERN,
ESSORAGE) and press the START/PAUSE (START/PAUSE, MARCHE/
PAUSE) button. (The water is drained or the washing is spun.)
The wash programme can be interrupted at any time by pressing the
3
START/PAUSE (START/PAUSE, MARCHE/PAUSE) button. It is then re-
started by pressing the button again. A wash programme can only be
changed after the programme knob has been turned to OFF (AUS,
ARRET).
Selecting an Additional Programme Function
The additional programme functions QUICK WASH (KURZ, COURT) or
STAIN (FLECKEN, TACHES) can still be selected after the programme has
started.
1. Press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button.
2. Press the QUICK WASH (KURZ, COURT) or STAIN (FLECKEN, TACHES)
button.
3. Press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button again.
The wash programme continues.
Changing the Spin Speed
Spin speed can still be changed or RINSE HOLD (SPÜLSTOPP, ARRET
CUVE PLEINE) set, while the programme is running.
1. Press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button.
2. Change the spin speed with the Spin Speed/RINSE HOLD (SPÜLSTOPP,
ARRET CUVE PLEINE) button.
3. Press the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button again.
The wash programme continues.
22