Basic Functions - Alcatel OT-S211C User Manual

5
Re move the back cover and remove the battery as shown
(di rection of the arrow).
3.

Basic functions

3.1 Switch-on/off
Whe n p ower is sufficient, pres s and holds the end key to switch
on. If yo u have activated a passw ord or a PIN code, you will be
prompted to enter it . Normally the phone is ready for use as
soon as you enter the password or the PIN code. For details on
the use of the PIN code and password, please refer to
Menu/Settings/Security settings. When the phone is on, press
and holds the end key to turn it off.
3.2 Making a call
3.2.1 Entering the number directly
In the standby mode , use the num ber key to enter a phone
number, then press th e call key to make the call.
3.2.2 Dialling a number in the Call M emory
In the standby mode, press the call key to access the Call
Memory, and press this key again to dial the selected number.
3.2.3 Speed dialling
In the standby mode, make a long key press on keys 2 to 9 to
speed-dial a number. If you have not set the number for speed
dialling, the phone will display "Speed dial is empty". Press the
left soft key to access the "Contact" and select speed dial. For
details regarding speed dial setting, please refer to
"Contacts/Speed dial".